Polyamide (PA6) or aluminum cover (ECA, optional), with position indicator dome.
FEATURES V SERIES
POSITION INDICATOR
END STOP ADJUSTMENT
UPPER CAMS: feedback adjustment
- Signal -> CLOSED position (black)
- Signal -> OPEN position (white)
LOWER CAMS: end of stroke angle definition (attention, for skilled operators only, wrong adjustment might damage the actuator)
- Signal -> CLOSED position (black)
- Signal -> OPEN position (white)
Various rotation angles possible:
- 4 adjustable limit switches (2 for motor control, 2 for feedback)
- third position possible (GF3 models)
- control via 4-20 mA or 0-10 V signal (POSI models)
CONTROL
- Internal DC motor with electronic control board (2 options):
- 12V to 48V DC /15V to 30V AC
- 100V to 240V AC (50/60Hz) / 100V to 350V DC
- Duty S4 – 50% (IEC 34)
- Control: ON / OFF or 3-point modulation mode
- Electronic torque limiter, software controlled
- Version with fail-safe security, to move to the safety position in case of power failure
- 3P + ISO43650 connections or cable gland
- RS485 connection for access to microcontroller
- Integrated self-regulating anti condensation heating resistors
- Error feedback relay
TORQUE & ADAPTION
GEARING
- self-locking gears
- add. mechanical end stops
- manual override (declutching button is spring return)
- with hand wheel (VS)
- by rotating at the upper shaft’s flat head (VR)
CONNECTION
- ISO 5211
- VR: F05-F07, double square 17mm
- VS: F07-F10, double square 22mm
- reducers available (double square, single square, flat head)
FAILSAFE
3RD POSITION
POSITIONING
